project |
parameter |
Remark |
|
BASIC PARAMETER |
pixel pitch | 2.5mm |
|
pixel structure | 1R1G1B |
|
|
pixel density | 160000/m 2 |
|
|
Module resolution | 96 (W)* 32 (H) |
|
|
Module size | 24 0mm* 8 0mm |
|
|
OPTIC PARAMETER |
Single point luminance, chromaticity correction | have |
|
white balance brightness | ≥700 cd/㎡ |
|
|
color temperature | 3200K—9300K adjustable |
|
|
Horizontal viewing angle | ≥ 140° |
|
|
vertical viewing angle | ≥ 120° |
|
|
Visible distance | ≥3 meters |
|
|
Brightness uniformity | ≥97% |
|
|
Contrast | ≥3000:1 |
|
|
PROCCESSING PERFORMANCE |
Signal processing bits | 16 bits*3 |
|
grayscale | 65536 |
|
|
control distance | Network cable: 100 meters, Optical fiber: 10 kilometers |
|
|
drive mode | High gray-scale constant current source driver IC |
|
|
frame rate | ≥ 60HZ |
|
|
refresh rate | ≥ 1920 Hz |
|
|
way to control | Synchronize |
|
|
Brightness adjustment range | 0 to 100 stepless adjustment |
|
|
OPERATION PERFORMANCE |
Continuous working time | ≥72 hours |
|
Typical life | 50,000 hours |
|
|
Protection class | IP20 |
|
|
range of working temperature | -20℃ to 50℃ |
|
|
Operating humidity range | 10 %- 80% RH non-condensing |
|
|
Storage temperature range | -20 ℃ to 60 ℃ |
|
|
ELECTRIC PARAMETER |
Operating Voltage | DC 4.2-5V |
|
Power Requirements | AC: 220×(1±10%)V, 50×(1±5%)Hz |
|
|
Maximum power consumption | 650W/ ㎡ |
|
|
Average power consumption | 260W/ ㎡ |
What should be paid attention to before using the LED display
The LED display is a display method that controls semiconductor light-emitting diodes. Its general appearance is composed of many light-emitting diodes, usually red, and the characters are displayed by the lights on and off. A display screen used to display various information such as text, graphics, images, animations, market quotations, videos, and video signals. What should I pay attention to before using the LED display? Xiaobian summarizes the following points for your reference.
1. After the customer receives the goods, please carefully check whether the goods are damaged during the logistics process.
2. When turning on the screen: turn on the computer first, then turn on the screen; when turning off the screen: turn off the screen first, then turn off the computer (turning off the computer first will cause high spots on the screen, easy to burn out the lamp, and serious consequences).
3. After the computer enters the LED control software, the screen can be powered on.
4. Avoid opening the screen when the LED screen is all red and out of control, because the inrush current of the system is large at this time.
5. When the ambient temperature is too high or the heat dissipation conditions are not good, care should be taken not to open the screen for a long time.
6. When a line of LED screen is very bright, you should pay attention to closing the screen in time. In this state, it is not suitable to open the screen for a long time.
7. The power switch of the LED screen often trips, and the screen body should be checked or the power switch should be replaced in time.
8. Always check the firmness of the joints. If there is any looseness, pay attention to timely adjustment.