-
LED Smart Conference Series Display
Specification:108″ 136″ 162″ 216
Pros:28mm of slim body thickness, fashionable and simple slim bezel-less design; screen occupancy ratio of up to 95%, broader visual extension, showing high-end atmosphere; screen body using die-casting aluminum structure design, high precision, light weight, good heat dissipation; full front maintenance, integrated design, no traditional external; power supply, receiver card, adapter board three-in-one design, stable performance; software and hardware independent research and development, strong compatibility
16:9 display ratio, low brightness and high grey, fine picture without loss; 2K-4K high-definition resolution, 12-14bit high-order grey scale, high contrast 1920-3840Hz high refresh, a variety of display sizes, multi-scene applications, restore the highest definition of the visual world, enjoy the best viewing experience
Conference application integrated control scheme design: local meeting, remote meeting, screen sharing, synchronous marking content computer, mobile phone, tablet multi-platform wireless screen, up to support four screens with the same display, interaction more convenient; a key switch, with status indicator; support remote control, simple and convenient operation, brightness, colour temperature, contrast, volume adjustment, signal source switching; convenient conference centre control, more Convenient control of the all-in-one terminal
Test mode selection and other functions support 1-channel 4K-60FPS decoding or up to 4-channel HD decoding at the same time, support 1-channel USB3.0, 2-channel USB2.0 expansion interface; support 2-channel HDMI input signal, support multi-screen display, support up to 2 input windows display (2-channel HDMI + built-in player); built-in Android 9.0 OS, customers can install applications according to Built-in Android 9.0 OS, customer can install applications as required; can be controlled via remote control; supports 4G, WiFi (2.4G/5G), WiFi hotspot (2.4G/5G), Gigabit LAN port, 3.5mm standard audio output, SPDIF, built-in speakers
Wall-mounted, mobile bracket installation, to meet the needs of different environments; LED conference screen without construction, segmented assembly structure unit design, reduce the user’s on-site work process, support 2 hours of rapid wall mounting, with high-precision die-casting aluminum box, segmented unit structure without the need for leveling calibration seams -
led screen led indoor display（Support customization）
Specification：
Pitch: P2 p2.22 p2.34 p2.5 p2.97 p3 p3.076 p3.91 p4 p5
Pros：More efficient heat dissipation control – die-cast aluminium cabinet design, unique heat dissipation design, to ensure the safe and stable operation of the product
More natural colour reproduction – LED display with 12-14bit grey level, more detailed picture effect
Standardised case size, allowing any splicing
Full black lamp, high contrast ratio, more vivid picture, richer colours, bringing a new visual experience High consistency, no dead angle and no colour deviation
With a single point of brightness, chroma correction, to solve the problem of bright colour inconsistency
The box supports pure front maintenance, more convenient installation and maintenance
Support back frame installation, stacking frame installation and other installation methods
Support horizontal 140°, vertical 120°, ultra-wide viewing angle, enjoy a new visual feast
Eliminate residual shadow circuit design, dynamic no ghosting, no trailing -
-
led display screen indoor display stage rental
1: Special angle lock for a variety of creative shape splicing, applied to a variety of occasions
2: Mixed splicing compatible modules, and different cabinets support mixed splicing
3: High quality module supporting front desk service
4: Up and down fast lock single quick installation
5: Support staggered splicing cabinet up and down left and right staggered half, to create a magical stage -
indoor curved led video wall panel soft led module
What is LED soft module? Compared with the conventional LED display, the soft-screen optoelectronic LED soft module is made of the hard-board PCB board and the hard-shell mask used in the conventional LED display, and has no flexibility. When encountering the need for radian and bending, it needs to be made with special processes such as chamfering, but the cost of using special processes will increase a lot, and the craftsmanship is not very beautiful.
LED module is a lighting decoration product composed of LED light-emitting diodes placed together according to certain rules and then packaged, plus some waterproof treatment and control systems. LED modules are widely used in LED products, and there are also great differences in structure and electronics. The simple is to use a circuit board and shell with LEDs to become an LED module, and to add some control to the complex, constant current source and related heat dissipation treatment make the LED life and luminous intensity better.
-
LED soft module indoor P2.5 led display full color
1. Using special materials and advanced technology, ultra-thin and ultra-light, the thickness of the three sizes of modules is 9-10mm,
Strong flexibility, can be bent up to 120°, and can be shaped into any shape (cylinder, wave, ring, spherical, heterosexual, etc.)
2. Adopt strong magnetic adsorption installation, direct adsorption, more convenient installation and maintenance. The box body is omitted, the structural load is reduced, and the cost is effectively reduced. Support floor-standing, hanging, embedded, hoisting and other installation methods
3. Using a magnetic suction module, the left and right and up and down directions can be adjusted by the translation of the module; by rotating the magnetic column, the height can be adjusted, thereby adjusting the flatness of the entire screen body
-
indoor rental led display P5.95 signage Billboard
1. Using special materials and advanced technology, ultra-thin and ultra-light, the thickness of the three sizes of modules is 9-10mm,
Strong flexibility, can be bent up to 120°, and can be shaped into any shape (cylinder, wave, ring, spherical, heterosexual, etc.)
2. Adopt strong magnetic adsorption installation, direct adsorption, more convenient installation and maintenance. The box body is omitted, the structural load is reduced, and the cost is effectively reduced. Support floor-standing, hanging, embedded, hoisting and other installation methods
3. Using a magnetic suction module, the left and right and up and down directions can be adjusted by the translation of the module; by rotating the magnetic column, the height can be adjusted, thereby adjusting the flatness of the entire screen body
-
Soft Module Shape Curved P4 LED Display Module
1. After the building advertising machine is turned on, it will automatically shut down
It is necessary to identify whether the menu setting of the building advertising machine is in a punctual shutdown state; the machine shows a short circuit and the main board can be replaced; the high-voltage bar is not working properly, replace the high-voltage bar; the remote control does not work.
2. When the LCD building advertising machine is switched on and off, there will be disturbing patterns on the screen
This situation is caused by the signal interference of the graphics card, which is a normal phenomenon. This doubt can be handled by automatic or manual phasing. -
Indoor Curving screen soft flexible led video display
1. Using special materials and advanced technology, ultra-thin and ultra-light, the thickness of the three sizes of modules is 9-10mm,
Strong flexibility, can be bent up to 120°, and can be shaped into any shape (cylinder, wave, ring, spherical, heterosexual, etc.)
2. Adopt strong magnetic adsorption installation, direct adsorption, more convenient installation and maintenance. The box body is omitted, the structural load is reduced, and the cost is effectively reduced. Support floor-standing, hanging, embedded, hoisting and other installation methods
3. Using a magnetic suction module, the left and right and up and down directions can be adjusted by the translation of the module; by rotating the magnetic column, the height can be adjusted, thereby adjusting the flatness of the entire screen body
-
P2.5 Module for LED Display Screen Video Wall Panel
Hotel application Large hotel lobby application, product shape: cylindrical (totem pole) led soft module. It can play the role of decorating the hotel lobby. In terms of function, it can be used as advertising media screen, clock screen, interest rate screen and other applications. The hotel can promote its own special products and services to attract more customers; the world clock can be placed on the led cylindrical screen, and the clock can be displayed in all directions, precise and comprehensive; the global currency exchange rate is displayed, which is convenient for international friends to check the currency exchange of the day in real time information.
-
Flexible LED Module Soft LED Display Curved LED
1. Using special materials and advanced technology, ultra-thin and ultra-light, the thickness of the three sizes of modules is 9-10mm,
Strong flexibility, can be bent up to 120°, and can be shaped into any shape (cylinder, wave, ring, spherical, heterosexual, etc.)
2. Adopt strong magnetic adsorption installation, direct adsorption, more convenient installation and maintenance. The box body is omitted, the structural load is reduced, and the cost is effectively reduced. Support floor-standing, hanging, embedded, hoisting and other installation methods
3. Using a magnetic suction module, the left and right and up and down directions can be adjusted by the translation of the module; by rotating the magnetic column, the height can be adjusted, thereby adjusting the flatness of the entire screen body
-
P4 LED Display Module Flexible Arbitrary Shape Curved
1. After the building advertising machine is turned on, it will automatically shut down
It is necessary to identify whether the menu setting of the building advertising machine is in a punctual shutdown state; the machine shows a short circuit and the main board can be replaced; the high-voltage bar is not working properly, replace the high-voltage bar; the remote control does not work.
2. When the LCD building advertising machine is switched on and off, there will be disturbing patterns on the screen
This situation is caused by the signal interference of the graphics card, which is a normal phenomenon. This doubt can be handled by automatic or manual phasing.
3. There is no response after the building advertising machine is plugged in
